Search
Skip to Search Results- 1Aghaie, Ermia
- 1Ahmed, Ezz Q
- 1Asha, Anika Benozir
- 1Behnamian, Yashar
- 1Chen, Xueyuan
- 1Deif, Sameir E. E.
- 5Luo, Jingli (Chemical and Materials Engineering)
- 3Chen, Weixing (Chemical and Materials Engineering)
- 2Mitlin, David (Chemical and Materials Engineering)
- 2Thundat, Thomas (Chemical and Materials Engineering)
- 1Biao Huang, Chemical and Materials Engineering
- 1Daneshmand, Mojgan (Electrical and Computer Engineering) - Supervisor
-
Fall 2022
Biofouling is a serious problem in the medical, marine, and several other industrial fields as it poses significant health risks and financial losses. Therefore, there is a great need to endow surfaces with antifouling and antimicrobial properties to mitigate biofouling. For long-term biofouling...
-
Fall 2009
Sheet and film forming processes refer to a set of processes that have a 2-dimensional sheet or film as their output. They are typically characterized by a scanning sensor which moves between the edges of the sheet in a periodic manner. This work is concerned with control and monitoring of such...
-
Fall 2015
The present research has been done with the intent of evaluating the corrosion resistance and cracking susceptibility of some commercial candidate alloys that can be potentially used in Gen-IV supercritical water reactor (SCWR). The mechanism of the crack initiation in austenitic alloys exposed...
-
Spring 2013
As the Supercritical Water-cooled Reactor (SCWR) shows a promising future, the corrosion behavior of candidate materials has attracted great interest. In this study, experimental investigation was conducted to evaluate the corrosion behavior of the ferritic-martensitic steels designed for the use...
-
Spring 2015
This thesis presents a thorough examination of the corrosion and fouling behaviour of crude oil at refining conditions on industrially applicable heat transfer surfaces. The depletion of light sweet crude oil reserves means that the processing of ever heavier and more sour crude oils is...
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Design and Implementation of Chipless RFID-Based Monitoring Sensor System for Coated Metallic Structures' Integrity
DownloadFall 2020
This thesis work presents structural health monitoring (SHM) techniques for coated-metallic structures based on Chipless Radio Frequency Identification (RFID) technology. The structures of interest for this study include pipelines for crude oil transportation and storage tanks (or terminals). The...
-
Fall 2022
The application of dissolvable materials is becoming widely used in hydraulic fracturing, especially in low permeability reservoirs. To date, most of the DAs are based on Al alloys (AAs) or Mg alloys, which offer desirable dissolvability, yet limited mechanical properties. This work aims to...
-
Effects of Oxide Additions on the Corrosion Behaviour of Cr2O3 Based Ceramics in High Temperature Supercritical Water Environment
DownloadFall 2012
This investigation is aimed at developing ceramic materials applied in supercritical water, which is being considered as coolant for one of the next generation nuclear reactors. Cr2O3, a primary protective film on stainless steels, was found to be unstable in SCW due to the formation of soluble...
-
Surface modification of zirconium implants via electrochemical anodization and wet chemical techniques
DownloadFall 2011
Metals such as titanium (Ti) and zirconium (Zr) have been widely applied in the orthopaedic and orthodontic field for construction of joint replacement prostheses and teeth implants due to their lower cytotoxicity, excellent mechanical properties, and corrosion resistance. However, the current...