Search
Skip to Search Results- 11Rapid Solidification
- 10Impulse Atomization
- 7Undercooling
- 6Atomization
- 6Microstructure
- 5Microalloyed Steel
-
2017-01-01
Spinelli, J.E., Hearn, W., Bogno, A.-A., Henein, H.
Understanding the influence of rapid solidification conditions on the formed microstructure is important to determine how process conditions affect the final mechanical properties. In this work the rapid solidification of hypoeutectic and hypereutectic Al-xSi (x=10wt. %, 18wt %) alloys was...
-
2016-01-01
Bogno, A.-A., Riveros, C., Henein, H., Li, D.
This paper investigates amorphous phase formation and rapid solidification characteristics of a CoCr alloy. High cooling rate and high undercooling-induced rapid solidification of the alloy was achieved by impulse atomization in helium atmosphere. Two atomization experiments were carried out to...
-
2018-01-01
Mohammadijoo, M., Collins, L., Henein, H., Ivey, D.G.
Pipeline failures can be severe events that impact both society and industry. The oil spills in North Battleford, Saskatchewan in 2016 and the gas rupture in Beardmore, Ontario in 2011 are examples of recent pipeline failures in Canada. Pipeline failures have led to pipe fabricators developing...
-
Characterization of a {(Fe60Co40)75B20Si5}96Nb4 Impulse Atomized Glassy Powder by Neutron Diffraction and Differential Scanning Calorimetry
Download2015-01-01
Bogno, A.-A., Dahlborg, U., Calvo-Dahlborg, M., Riveros, C., Ciftci, N., Henein, H., Sediako, D.
This paper investigates FeCo-based alloy glass formability by high undercooling and high cooling rate solidification technique and the hardness evaluation of the generated samples. For this investigation, Impulse Atomization was used to generate {(Fe60Co40)75B20Si5}96Nb4 powders of different...
-
2016-01-01
Bedel, M., Reinhart, G., Bogno, A.-A., Gandin, Ch.-A., Jacomet, S., Boller, E., Nguyen-Thi, H., Henein, H.
The Impulse Atomization process developed at the University of Alberta (Canada) enables metallic powders to be solidified with well controlled process parameters. The inner microstructure of several droplets of Al-4.5wt.%Cu alloy produced by this technique has been investigated by using both...
-
Characterization of HAZ of API X70 Microalloyed Steel Welded by Cold-wire Tandem Submerged Arc Welding.
Download2016-01-01
Mohammadijoo, M., Kenny, S., Ivey, D.G., Collins, L., Henein, H.
High strength low carbon microalloyed steels may be adversely affected by the high heat input and thermal cycle that they experience during tandem submerged arc welding (TSAW). The heat affected zone (HAZ), particularly the coarse grained heat affected zone (CGHAZ), i.e., the region adjacent to...
-
Characterization of martensite-austenite constituents and micro-hardness in intercritical reheated and coarse-grained heat affected zones of API X70 HSLA steel
Download2017-01-01
Mohammadijoo, M., Valloton, J., Collins, L., Henein, H., Ivey, D.G.
The thermal cycles that high strength low alloy (HSLA) low carbon steels experience during welding inevitably affect the microstructure and mechanical properties of the weld joints. It is generally agreed that the coarse-grained heat affected zone (CGHAZ) and the intercritical reheated...
-
CHARACTERIZATION OF X80 AND X100 MICROALLOYED PIPELINE STEEL USING QUANTITATIVE X-RAY DIFFRACTION
Download2018-01-01
Wiskel, J.B., Li, X., Ivey, D.G., Henein, H.
Quantitative X-ray diffraction characterization of four (4) X80 and three (3) X100 microalloyed steels was undertaken. The effect of through thickness position, processing parameters and composition on the measured crystallite size, microstrain and J index (relative magnitude of crystallographic...
-
Design and processing conditions of hypoeutectic Al-Cu-Sc alloys for maximum benefit of scandium
Download2017-01-01
Bogno, A.-A., Henein, H., Gallerneault, M.
Addition of Sc to Al-Cu is reported to be responsible for a high precipitation hardening upon heat treatment and serves as a good grain refiner. However, Scandium is presently very expensive, therefore, getting maximum benefit from a minimum addition would be economically of value. This work...
-
Effect of cold wire addition in tandem submerged arc welding on weld geometry and micro-hardness of heavy gauge X70 steel
Download2022-01-01
Ren, T., Mohammadijoo, M., Wiskel, J.B., Lazor, R., Willett, E., Ivey, D.G., Henein, H.
The pipeline industry has undertaken an essential upgrade of well established X70 pipeline steel in heavy gauge pipes to fill the demand of increased operating pressures. A developed welding process, cold wire tandem submerged arc welding (CWTSAW), with improved deposition rate and travel speed...