Search

Fall 2014

Zhang, Zhenyuan

Storm water ponds have been widely constructed over the past four decades as part of municipal storm water drainage systems. These ponds are designed to collect neighborhood storm water run-off to reduce flooding, but can also improve the quality of water discharged to surface water bodies by...

Fall 2015

Caverhill-Godkewitsch, Saul A.

The infrastructure necessary to support diagnostic and pathogen-detection processes does not exist in some regions of the world that need it most. Access to fast, inexpensive and portable diagnostic infrastructure could be a solution to this problem. Next generation lab-on-chip (LOC) systems that...

Fall 2015

Murphy, Jeffrey Nathaniel

2015 marks the 50th anniversary of Moore's law, which has described the exponential progress in semiconductor patterning technologies, enabling creation of smaller circuitry features at greater densities. These continued hardware developments, economically mass manufactured, have made possible...

Spring 2015

Biabangard Oskouyi, Amirhossein

In this thesis, a novel three-dimensional continuum percolation model based on Monte Carlo simulation approach was developed and employed to investigate the percolation behavior of the electrically insulating matrix reinforced with conductive nanoplatelet fillers such as graphene. The...

Spring 2015

Osborn, Ian

A multi-purpose settling column was designed to determine settling rate and sediment height allowing the in-situ measurement of yield stress and drainage without disturbing the sediment particle network. The settling column was applied to studying flocculation/densification of model oil sands...

Fall 2015

Perron, David H.

Nanoplasmonic devices have received much attention in recent years due to their ability to confine light below the diffraction limit, thereby providing a potential route to the creation of nanometer-scale integrated photonic devices. However, with the strong confinement of light come large...

Fall 2015

Pouralhosseini, Sayyid S

Mixtures of colloids + non-adsorbing polymers + good solvents are well known to exhibit multiphase behaviors that are driven by the depletion flocculation mechanism where one phase, designated a colloid gas, is largely comprised of polymer and solvent, while the other phase, designated a colloid...

Fall 2016

Bayati, Fatemeh

Synthetic polymers are still widely used in today’s life despite all environmental issues attributed to them. Replacing synthetic polymers with natural biodegradable polymers has been considered as a way of reducing these environmental impacts partially, if not completely. Hydroxyporpyl xylan...

Spring 2016

Bhambri, Pallavi

The current study investigates the drag reduction (DR) using high molecular weight polymers such as commercial polyacrylamide, polysaccharides and thermo-responsive polymers. A Taylor-Couette (TC) setup was designed and fabricated to examine the abovementioned polymers for drag reduction, and to...

Spring 2017

Thompson, Dominic K

Oilsands tailings are a waste product comprising primarily a stable alkaline suspension of clay in water. This waste product of oilsands mining is environmentally hazardous to store and expensive to safely dispose of. This work presents two novel ideas for dealing with the waste. The first is...