Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Ashrafizadeh, Sayed Hossein
- 1Baker, Kathleen E.N.
- 1Bhushan, Vivek
- 1Borle, Steven D
- 23Department of Chemical and Materials Engineering
- 13Department of Civil and Environmental Engineering
- 7Department of Mechanical Engineering
- 5Department of Renewable Resources
- 4Department of Earth and Atmospheric Sciences
- 1Chemical and Materials Engineering
- 4Li, Dongyang (Chemical and Materials Engineering)
- 4Mendez, Patricio (Chemical and Materials Engineering)
- 2Driver, Robert (Civil and Environmental Engineering)
- 2Ulrich, Ania (Department of Civil and Environmental Engineering)
- 2Zeng, Hongbo (Chemical and Materials Engineering)
- 1Amit Kumar (Mechanical Engineering)
-
Characterization of Clay Minerals in the Athabasca Oil Sands in Water Extraction and Nonaqueous Solvent Extraction Processes
DownloadFall 2011
Production of oil from the second largest oil deposit in the world, i.e., the Alberta oil sands containing approximately 13% of total proven oil reserves in the world (169.9 billion barrels), has been shown to be significantly influenced by clay minerals. Clay minerals in particular play a key...
-
Fall 2019
Residual stresses can have a significant impact on the stability of structural members. In the case of I-section beam elements, such stresses can impact lateral--torsional buckling (LTB) capacity, particularly in the inelastic range. I-sections are typically fabricated by either rolling as a...
-
Fall 2013
Hydraulic transport is commonly employed in the mining industry to transport crushed ore to a processing facility. Dense slurry flows inflict heavy wear on pipes, leading to significant process downtime and loss of revenue. Several factors have been identified as key contributors to pipe wear. ...
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...
-
Fall 2015
Mechanical, tribological and corrosion properties of metallic materials are of significance to their industrial applications and have been studied for long time. Efforts are continuously made to correlate these properties to more fundamental parameters in order to effectively improve the...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Spring 2019
This thesis aims to demonstrate the feasibility of using System Dynamics (SD) techniques to develop a transparent, open-source and reproducible model capable of simulating long-term soil water dynamics in a tailings-cap system subject to upward flux from a consolidating tailings substrate. The...
-
Spring 2017
During the past several decades, the relationship between microstructure and mechanical properties of high strength microalloyed steels has been extensively studied in an effort to improve the fracture toughness and strength of these types of steels, without appreciably increasing steel...