Search
Skip to Search Results- 1Ali, Mostafa A A
- 1Bineshmarvasti, Baher
- 1Dewar, Matthew P
- 1Duong, Eric
- 1Gawor, Steffen
- 1Holden, Theresa A
-
Fall 2017
Casing pipes used in sour service are prone to two forms of failure: hydrogen induced cracking (HIC) and sulfide stress cracking (SSC). The objective of this thesis is to investigate the resistance of L80 ERW and Seamless steel pipe, with five different chemical compositions, to both HIC and SSC....
-
Spring 2019
The formation of bainite is the most studied and the most debated phase transformation in steels, with research spanning almost a century. With two theories of transformation, the transformation mechanism of bainite is still a disputed subject among physical metallurgists. Upper bainite and lower...
-
Modeling of the Effect of Run-out Table Cooling on the Microstructure of a Thick Walled X70 Skelp
DownloadSpring 2018
This thesis presents work performed to model and measure the effect of run-out table cooling on a thick walled X70 steel. During run-out table cooling, the steel undergoes several phase transformations that will affect its microstructure, and thus, its mechanical properties. To predict the steel...
-
Fall 2011
Optimization techniques, in conjunction with a finite element thermal model, are used in this thesis to optimize the temperature profile (i.e. cooling rate and coiling temperature) of a steel skelp during laminar cooling. Optimization parameters include skelp velocity, laminar cooling bank...
-
Fall 2021
Newer energy codes for buildings in Canada now require energy losses associated with thermal bridging in smaller components to be accounted for. In masonry cavity wall systems, most of the energy losses from thermal bridging are due to structural penetrations at floor levels located at the shelf...
-
Reliability Centered Maintenance (RCM) and Ultrasonic Leakage Detection (ULD) as a maintenance and condition monitoring technique for freight rail airbrakes in cold weather conditions
DownloadSpring 2015
Freight rail airbrakes need improvement in reliability to reduce failures, which can lead to harm to the environment, loss of human life, and a negative impact on the economy. This research focuses on identifying the failures of airbrakes using a Reliability Centered Maintenance (RCM) framework,...
-
The Role of Sulfur Species in Establishing the Corrosion Reactions in Refinery Metallurgies
DownloadSpring 2016
This thesis is focused on the studying the role that model sulfur-containing molecules have in corrosion reactions on relevant metallurgies. This was done by using a design of experiments where a number of sulfur-based compounds were reacted with various metallurgies. The 8 model sulfur compounds...
-
Ultrasonic Characterization of Bitumen with Pressure and Temperature: Implications for seismic monitoring of the Grosmont Formation
DownloadFall 2018
The vastly untapped carbonate Grosmont Formation in north-eastern Alberta may hold in excess of a couple of hundred billion barrels initial volume of bitumen in place. Bitumen, an ultra-heavy hydrocarbon oil, possesses a density comparable to water, but a dynamic shear viscosity million times...
-
Spring 2015
Traditionally in pipeline steels and welds, ultrasonic testing (UT) has been used for crack and/or flaw detection. The work presented in this Thesis explores the use of this technique to characterize the microstructure of pipe steels. Ultrasonic velocity calculations, for shear and longitudinal...
-
Spring 2020
ML80 and Grade 483 are heat treatable steels, produced by a quench and temper process, that are used in the oil and gas industry. The development of the microstructure during heat treatment is important to ensure that the correct properties are achieved for these steels. However, a real-time...