Search
Skip to Search Results- 13Additive manufacturing
- 3Porosity
- 2Mechanical properties
- 2Plasma transferred arc
- 117-4PH Stainless Steel
- 117-4PH stainless steel
- 9Graduate and Postdoctoral Studies (GPS), Faculty of
- 9Graduate and Postdoctoral Studies (GPS), Faculty of /Theses and Dissertations
- 2Mechanical Engineering, Department of
- 1Chemical and Materials Engineering, Department of
- 1Chemical and Materials Engineering, Department of/Research Articles and Materials (Chemical and Materials Engineering)
- 1WISEST Summer Research Program
-
A Fully 3D Printed Waveguide and its Application as Microfluidically Controlled Waveguide Switch
DownloadFall 2016
Hollow rectangular waveguides are employed extensively in microwave and millimeter wave devices owing to their relatively high power handling capabilities and low losses, particularly at higher frequencies, compared to transmission lines. However, the fabrication of such metal waveguides suffer...
-
Additive Manufacturing of Shape Memory Polymers: Effects of Print Orientation and Infill Percentage on Mechanical and Shape Memory Recovery Properties
DownloadFall 2017
Material Extrusion Additive Manufacturing (MEAM), also known as Fused Deposition Modeling (FDM), is a manufacturing technique in which three-dimensional objects are built. These objects are built by repeatedly extruding thin layers of molten materials through a nozzle in different paths and...
-
Spring 2018
Shape memory polymers (SMPs) can be used in many critical applications, including biomedical and aerospace fields, due to their ability to recover their original/permanent shape from a deformed/temporary shape upon application of a stimulus. SMPs are subjected to bending in a large number of...
-
Design and system identification for a plasma transferred arc additive manufacturing technology
DownloadFall 2021
The increase in the pace of development of additive manufacturing technology opens new markets and expands the scope of research and knowledge. Additive manufacturing, previously known as rapid prototyping, can employ advanced state-of-the-art materials, such as metal composites, in metal 3D...
-
Development and characterization of magnetic particle reinforced polymers for additive manufacturing processes
DownloadFall 2020
Additive manufacturing enables the production of complex parts with less tooling and minimum material wastage. Polymer composites with magnetic functionality are promising for many applications like sensors, non-contact actuators and permanent magnets for electromechanical devices. The primary...
-
Electromechanical Properties of 3D-Printed Smart Materials for Structural Health Monitoring
Download2022-06-01
Saleh, Menna A., Kempers, Roger, Melenka, Garrett W.
Smart materials with sensing capabilities are an exciting new technology that will impact many applications, including structural health monitoring (SHM), biomedical implants, wearable sensors, automotive, and actuators. Strain sensors (piezoresistive material) for SHM can be used to measure the...
-
Geometric Tolerance Quantification and Prediction Framework for Additive Manufacturing Processes
DownloadFall 2021
Additive Manufacturing (AM) is an advanced manufacturing technology used to manufacture custom and geometrically complex parts using a layer-by-layer material addition process. Variations in the AM process lead to ‘deviations’ in the manufactured part, resulting in geometric non-conformance. To...
-
Improving 3D Printability and Functional Performance of Polyethylene across Visible and IR Spectrums through IR Transparent Pigmentation and Polyolefin Additives
DownloadFall 2023
Polyolefin thermoplastics form a significant fraction of the world scale production of plastics and are of high interest due to their toughness, low cost, good chemical resistance and excellent IR properties. Two grades of PE: Linear Low-Density Polyethylene (LLDPE) and High-Density Polyethylene...
-
Mechanical and microstructural properties of a CoCrFe0. 75NiMo0. 3Nb0. 125 high-entropy alloy additively manufactured via cold-spray.
Download2022-02-10
Rojas, David Funes, Li, Haoyang, Orhan, Okan K., Shao, Chenwei, Hogan, James D., Ponga, Maricio
We present a combined experimental and computational investigation of the mechanical properties of a CoCrFe0.75NiMo0.3Nb0.125 (composition in molar ratio) high-entropy alloy additively manufactured via cold spray. We find that the sprayed alloy exhibits extraordinary mechanical properties under...