SearchSkip to Search Results
- 71Chemical and Materials Engineering, Department of
- 67Chemical and Materials Engineering, Department of/Research Articles and Materials (Chemical and Materials Engineering)
- 8Surgery, Department of
- 8Surgery, Department of/Orthopaedic Surgery
- 4Chemical and Materials Engineering, Department of/Process Systems Engineering
- 1ERA General Collection
- 12Rapid Solidification
- 11Impulse Atomization
Addition of Sc to Al-Cu is reported to be responsible for a high precipitation hardening upon heat treatment and serves as a good grain refiner. However, Scandium is presently very expensive, therefore, getting maximum benefit from a minimum addition would be economically of value. This work...
Transverse tensile samples were extracted from the centreline position of three different compositions of uncoated thick walled microalloyed X70 UOE pipe at a location 180° from the weld. Aging heat treatments of 5, 15, and 25 minutes and temperatures of 175, 215, and 255°C were applied. Tensile...
Objective: Osteochondral allografting is an effective method to treat large osteochondral defects but difficulties in tissue preservation have significantly limited the application of this technique. Successful cryopreservation of articular cartilage (AC) could improve the clinical availability...
Investigating cryoinjury using simulations and experiments: 1. TF-1 cells during two-step freezing (rapid cooling interrupted with a hold time)Download
There is significant interest in designing a cryopreservation protocol for hematopoietic stem cells (HSC) which does not rely on dimethyl sulfoxide (Me2SO) as a cryoprotectant. Computer simulations that describe cellular osmotic responses during cooling and warming can be used to optimize the...
Pipeline failures can be severe events that impact both society and industry. The oil spills in North Battleford, Saskatchewan in 2016 and the gas rupture in Beardmore, Ontario in 2011 are examples of recent pipeline failures in Canada. Pipeline failures have led to pipe fabricators developing...
The Hybrid tank pilot plant was designed in Process Control Laboratory (PCL) of the University of Alberta at 2009. In this report, we try to construct a model for this process. Using the physical behavior of the plant, it is possible to have the nonlinear first principle dynamic model of that...
Poor control of hot strip mill loopers degrades strip width and gauge, and may even lead to mill breakdowns due to instability. In this study, dynamics of the looper-strip system and the control challenges it poses are discussed, and covariance control theory is applied to variance control design...
Rapid solidification of D2 tool steel is investigated experimentally using ElectroMagnetic Levitation (EML) under terrestrial and reduced gravity conditions and Impulse Atomization (IA), a drop tube type of apparatus. IA produces powders 300 to 1400 μm in size. This allows the investigation of a...
Background Vitrification is a method of cryopreservation by which cells and tissues can be preserved at low temperatures using cryoprotective agents (CPAs) at high concentrations (typically ⩾6.0 M) to limit the harmful effects of ice crystals that can form during cooling processes. However, at...
Evaluation of Cold-Wire Addition Effect on Heat Input and Productivity of Tandem Submerged Arc Welding for Low-Carbon Microalloyed SteelsDownload
The addition of a cold wire in conventional tandem submerged arc welding (TSAW), i.e., the CWTSAW process, is proposed to improve the productivity of pipeline manufacturing by increasing welding travel speed and deposition rate, while retaining adequate joint geometry without increasing the...