Search

Spring 2020

Lu, Yi

Interfacial properties at the oil-water interface are of key importance to various operations in the petroleum industry, especially in the aqueous-based heavy oil recovery process. However, different operation stages often require different interfacial properties, which could be conflicted with...

Spring 2010

Zheng, Haijun

Filtration performance of mineral concentrate is mainly controlled by solid particle size and surface hydrophobicity. Filtration of coarser particles with more hydrophobic surfaces produces better filtration performance characterized by higher filtration rate (U) and lower final moisture content...

Spring 2010

Adegoroye, Adebukola

Understanding mineralogy and surface properties of fine solids is vital in oil sands processing and tailings management. Fine solids in oil sands are often contaminated by tightly bound organic matter (OM) originally or during hydrocarbon removal, thereby increasing surface hydrophobicity and...

Fall 2010

Salehi, Mohammadreza

Continuous accumulation of Mature Fine Tailings (MFT) is a major challenge to oil sands industry. To reduce the inventory of MFT through development of novel tailings treatment technologies, it is essential to understand the stabilization mechanism of fine solids in MFT. This project aims at...

Fall 2012

Ma, Yuan

Two major kinds of natural surfactants are released during oil sands extraction: carboxylic acids (naphthenic acids) and sulfonic acids. In this study, commercial surfactants were used as standards to establish the suitable analytical methods with optimized experimental and instrumental...

Fall 2014

Rafie Borujeny, Elham

Interactions of finely dispersed abrasive particles in chemical mechanical planarization (CMP) slurries play a vital role in determining the polishing performance. In this study, coupled influence of hydrodynamic and colloidal interactions on the attachment of nanosized ceria (CeO2) particles to...

Fall 2011

Lin, Fangjian

Slurry stability is an important factor in Chemical Mechanical Polishing (CMP) efficiency. However, few studies have been done in this respect. In settling tests at pH 4, adding various amounts of ceria to colloidal silica slurries was shown to change the stability of the resulted mixed abrasive...

Spring 2011

Xie, Jinggang

A Surface Forces Apparatus (SFA) was used in this study to investigate the fundamental surface forces in oil sand processing research. Asphaltene coated surfaces were chosen as the research topic due to the critical role of asphaltenes in oil sands processing, from bitumen extraction, froth...

Spring 2013

Wang, Louxiang

As one of the most critical steps to recover valuable particles from a slurry using flotation, knowledge of the drainage of the thin liquid film between an air bubble and a solid surface is required. The main focus of this thesis is to develop and use an integrated thin film drainage appratus...

Fall 2019

Li,Rui

The spontaneous displacement of a fluid in another immiscible one on a solid surface is essential for many technical applications, such as painting, detergency, bitumen extraction and enhancing oil recovery. This project was motivated by exploring a process of high viscosity bitumen displaced by...