Search
Skip to Search Results- 44Xu, Zhenghe (Chemical and Materials Engineering)
- 10Liu, Qingxia (Chemical and Materials Engineering)
- 9Masliyah, Jacob (Chemical and Materials Engineering)
- 3Choi, Phillip (Chemical and Materials Engineering)
- 2Masliyah, Jacob H. (Chemical and Materials Engineering)
- 1Afacan, Artin (Chemical and Materials Engineering)
- 1Adegoroye, Adebukola
- 1Ansari, Nesma Nasir
- 1Bobicki, Erin R.
- 1Chan, Margo Chi Wing
- 1Chowdhry, Manjeet
- 1Curran, Meghan D
-
A study of the colloidal stability of mixed abrasive slurries of silica and ceria nanoparticles for chemical mechanical polishing
DownloadFall 2011
Slurry stability is an important factor in Chemical Mechanical Polishing (CMP) efficiency. However, few studies have been done in this respect. In settling tests at pH 4, adding various amounts of ceria to colloidal silica slurries was shown to change the stability of the resulted mixed abrasive...
-
Spring 2010
Commercial Magnafloc 1011and in-house synthesized Al-PAM were used as flocculants for model tailings, laboratory extraction tailings and tailings from paraffin froth treatment unit. The polymers were tested for their flocculation ability in settling and filtration. For model tailings, both...
-
Spring 2010
Understanding mineralogy and surface properties of fine solids is vital in oil sands processing and tailings management. Fine solids in oil sands are often contaminated by tightly bound organic matter (OM) originally or during hydrocarbon removal, thereby increasing surface hydrophobicity and...
-
Dynamic Demulsification Mechanism of Asphaltene-Stabilized Water-in-Oil Emulsions by Ethylcellulose
DownloadFall 2015
In previous studies, nontoxic and biodegradable ethylcellulose (EC) was shown to be capable of breaking water-in-diluted bitumen emulsions. Nevertheless, the demulsification mechanism of EC has not been correlated to its effect on the physical properties of stabilizing interfacial asphaltene...
-
Fall 2011
This project was initiated to study the H2S removal process from liquid sulfur and later extended to generic liquid degassing scenarios. Enersul HyspecTM Degassing Process was first field tested so that comparison could be made with new units to be engineered. Two new degassing units were...
-
Interfacially Active Magnetic Nanoparticles for Efficient Oil/Water Separation from Oil-in-Water or Water-in-Oil Emulsions
DownloadSpring 2020
The emulsions, either oil-in-water (O/W) or water-in-oil (W/O) emulsions, are inevitably formed during the industrial production processes and the daily household activities. The O/W emulsions such as crude oil-in-water emulsions or oily wastewaters generated from the industrial fields, oil...
-
Theoretical study on reactivity of different sulfide collectors and their binding affinity toward Cu(II), Zn(II) and Pb(II) ions.
DownloadSpring 2016
Collectors are one of the most important ingredients of froth flotation in mineral processing, as they selectively render the desired minerals more hydrophobic than others. Current crop of sulfide collectors interact with almost all sulfide minerals. This necessitates the use of complicated...
-
Fall 2014
Management of oil sands tailings from bitumen extraction operations remains a challenge for mineable oil sands producers. Promoting fine solids settling in tailings ponds is key to treating oil sands tailings. Present study explores two methods of tailings treatment – ATA process and polymer...
-
Fall 2011
The correlation between froth recovery and air recovery was established in a top-feeding mechanical flotation column. It was also found that the particles were stratified in froth layer, with hydrophobic particles (organic phase) concentrated in the upper region, and hydrophilic particles...
-
Characterization of mature fine tailings in the context of its response to chemical treatment
DownloadFall 2010
Continuous accumulation of Mature Fine Tailings (MFT) is a major challenge to oil sands industry. To reduce the inventory of MFT through development of novel tailings treatment technologies, it is essential to understand the stabilization mechanism of fine solids in MFT. This project aims at...