Search
Skip to Search Results- 44Xu, Zhenghe (Chemical and Materials Engineering)
- 17Liu, Qi (Chemical and Materials Engineering)
- 10Liu, Qingxia (Chemical and Materials Engineering)
- 9Masliyah, Jacob (Chemical and Materials Engineering)
- 3Choi, Phillip (Chemical and Materials Engineering)
- 3Ivey, Douglas (Chemical and Materials Engineering)
- 1Adegoroye, Adebukola
- 1Ansari, Nesma Nasir
- 1Bianchini Moroni, Ana Maria
- 1Bobicki, Erin R.
- 1Chan, Margo Chi Wing
- 1Chen, Qiang
-
Spring 2013
As one of the most critical steps to recover valuable particles from a slurry using flotation, knowledge of the drainage of the thin liquid film between an air bubble and a solid surface is required. The main focus of this thesis is to develop and use an integrated thin film drainage appratus...
-
Probing Deformable Oil-Water Interfaces by Atomic Force Microscopy and Cascade Partial Coalescence Measurements
DownloadFall 2016
Phase separation of stable oil-in-water and water-in-oil emulsions poses major challenges for a variety of industries, including the petroleum industry. The stability and destabilizing of petroleum emulsions highly depend on interfacial properties such as surface/interfacial charges, interfacial...
-
Spring 2010
Understanding mineralogy and surface properties of fine solids is vital in oil sands processing and tailings management. Fine solids in oil sands are often contaminated by tightly bound organic matter (OM) originally or during hydrocarbon removal, thereby increasing surface hydrophobicity and...
-
Spring 2015
In many applications, it is desired to separate unwanted fine particulates from a liquid by gravity settling. An efficient separation, however, will be feasible only if a combination of aggregation and sedimentation occurs. To understand the kinetics of such a process, a mathematical model that...
-
A fundamental study of bubble-particle interactions through zeta-potential distribution analysis
DownloadSpring 2011
Understanding the mechanism of bubble-particle interactions plays a critical role in advancing flotation technology. In this study, submicron size bubbles with an average diameter less than 1 μm and a life time of at least several hours were generated using a novel hydrodynamic cavitation method....
-
Fall 2009
The dominant materials used for solders in electronic assemblies over the past 60 years have been Pb-Sn alloys. Increasing pressure from environmental and health authorities has stimulated the development of various Pb-free solders. Two of the most promising replacements are eutectic Sn-Cu and...
-
The Use of Polyacrylamide as a Selective Depressant in the Separation of Chalcopyrite and Galena
DownloadSpring 2013
High molecular weight polyacrylamide (PAM) was tested as a potential selective depressant in the differential flotation separation of galena and chalcopyrite using potassium ethyl xanthate (KEX) as a collector. In single mineral flotation, PAM depressed chalcopyrite while galena was floatable....
-
Fall 2018
Many tailings treatment technologies rely on the use of water-soluble polyacrylamides (PAM) to flocculate fine solids. However, PAM-induced flocs are often loosely-structured and retain significant volume of water due to the hydrophilicity of PAM and fine clays in oil sands fine tailings....
-
Fall 2010
To better understand bitumen conditioning stage in oil sands extraction process a flow cell was designed to study bitumen liberation directly from sand grains, using real oil sand ore. A high-grade oil sand ore was subjected to various water temperatures and pH values to examine the bitumen...
-
Fall 2014
The non-aqueous extraction process involves dilution of mined oil sand with an organic solvent (the “diluent”), followed by separation of unwanted materials (clays, silica sand, connate water, etc.) from the diluted bitumen. The main focus of this research is on the removal of fines solids from...