Search
Skip to Search Results- 1352Department of Chemical and Materials Engineering
- 3Department of Biomedical Engineering
- 2Department of Biological Sciences
- 2Department of Laboratory Medicine and Pathology
- 1Department of Civil and Environmental Engineering
- 1Department of Human Ecology
- 2Bendrich, Michelle
- 2El-Thaher, Nayef
- 2Fadic Eulefi, Anton
- 2Hoseinzadeh Hejazi, Sayed Alireza
- 2Hosseininejad, Seyed Shaham Aldin
- 2Kammammettu, Sanjula
- 44Xu, Zhenghe (Chemical and Materials Engineering)
- 40Huang, Biao (Chemical and Materials Engineering)
- 34Liu, Qingxia (Chemical and Materials Engineering)
- 29Zeng, Hongbo (Chemical and Materials Engineering)
- 27Henein, Hani (Chemical and Materials Engineering)
- 21Gupta, Rajender (Chemical and Materials Engineering)
-
Fall 2010
This research deals with the modeling and control of a plasticating twin screw extruder (TSE) that will be used to obtain consistent product quality. The TSE is a widely used process technology for compounding raw polymers. Compounding creates a polymer with improved properties that satisfy the...
-
Spring 2013
In the process industry, the alarm system acts as a layer of protection between the Basic Process Control System (BPCS) and the Safety Instrumented System (SIS). The BPCS is designed for automatic regulation of day to day process operation and SIS comes into picture when emergency shutdown is...
-
Spring 2013
Titanosilicate has unique properties in adsorptive separations such as air separations. In this study, Ag-ETS-10 was investigated for argon free oxygen production. During laboratory scale breakthrough experiments high purity (99.7+%) oxygen was produced at 100 kPa and 25 °C, with a recovery rate...
-
Spring 2014
Magnowski, Nicholas Brooks Kenneth
The natural gas industry recognises that the need for removal of CH4 from C2H6 feedstock C2H4 production and utilization. CH4 being a contaminant in the production of C2H4 and furthermore in the production of polymers from C2H4. Dethanizers in gas processing plants are energy intensive and...
-
Adsorptive Removal of CO2 by Amine Functionalized Sorbents: Experimental and Kinetics Study
DownloadFall 2012
Adsorption processes using functionalized ordered mesoprous silica sorbents have shown a great potential for post-combustion CO2 capture from flue gas. In this work an experimental and theoretical investigation was conducted on the adsorptive removal of CO2 onto amine functionalized mesoporous...
-
Fall 2015
High purity microporous vanadosilicate (EVS-10/AM-6) has been hydrothermally synthesized by a simple template-free, reducing agent-free method in the absence of titanosilicate ETS-10 seeds. Direct comparison between EVS-10 and ETS-10 showed successful isomorphous substitution of titanium with...
-
Fall 2011
Air Separation is the largest industrial separation process in the world in which air is separated to its primary constituents including, nitrogen, oxygen, and argon. Technical gases are applied in many important industries such as steel industry, chemical processes, oil and gas production,...
-
Spring 2010
The technique of Inverse Gas Chromatography (IGC) was employed for the study of the interactions between various organic solvents with various types of the major inorganic materials (clay minerals and sand) found in Alberta’s oil sands. Heat of adsorption (-∆H) was measured for each solvent with...
-
Fall 2019
Interfacial activity of SAGD PW endogenous surfactants, humic acids (HAs), and their interaction dynamics with naphtha-diluted Alberta oil sand bitumen (AOSB) present in model SAGD produced water has been addressed in the first part of this PhD thesis. Dynamic interfacial tension σ(t) between oil...