Search
Skip to Search Results- 17Liu, Qi (Chemical and Materials Engineering)
- 3Ivey, Douglas (Chemical and Materials Engineering)
- 2Yeung, Anthony (Chemical and Materials Engineering)
- 1Gray, Murray (Chemical and Materials Engineering)
- 1Tan, Xiaoli (Chemical and Materials Engineering)
- 1Xu, Zhenghe (Chemical and Materials Engineering)
- 1Bianchini Moroni, Ana Maria
- 1Chen, Qiang
- 1Crozier, Brendan Matthew
- 1Dalili, Neda
- 1Han, Chunfen
- 1Haroon, M Hasin
-
Water-mediated adhesion of oil sands on solid surfaces at low temperature and possible solutions to mitigate adhesion
DownloadSpring 2022
Adhesion of frozen granular materials on solid surfaces creates various problems for surface cleaning, reduces the carrying capacity of vehicles, and increases energy consumption for inland transportation. Here in the first part of this thesis, water content demonstrates to determine the adhesion...
-
Using Surface Geopolymerisation Reactions to Strengthen Athabasca Oil Sands Mature Fine Tailings
DownloadFall 2015
Bitumen extraction from oil sands operation in Fort McMurray, Canada produces an immense quantity of slurry waste that is discharged to tailings ponds. These ponds now stretch over a region which is roughly 1.5 times the area occupied by Vancouver city mainly due to slow consolidation process of...
-
The Use of Polyacrylamide as a Selective Depressant in the Separation of Chalcopyrite and Galena
DownloadSpring 2013
High molecular weight polyacrylamide (PAM) was tested as a potential selective depressant in the differential flotation separation of galena and chalcopyrite using potassium ethyl xanthate (KEX) as a collector. In single mineral flotation, PAM depressed chalcopyrite while galena was floatable....
-
Fall 2014
The current bitumen extraction process has an alarming and increasing environmental impact that is forcing the industry to find a better way to produce oil. The solution that is in development is a solvent based bitumen extraction process. The removal of fines solids is still an important issue...
-
Spring 2017
Dewatering of the oil sands mature fine tailings (MFT) is studied through pressure filtration following treatment by dual polymer flocculants. Polymer pairs consisting of anionic polyacrylamide (A3335) and cationic polyDADMAC (Alcomer 7115), and A3335 and non-ionic polyethylene oxide (PEO) are...
-
Organically-Modified Clay Minerals in Oil Sands: Characterization and Effect of Hydrothermal Treatment
DownloadFall 2017
The intimate association between bitumen components and clay minerals is an important feature of oil sands fine solids. These organically-modified clay minerals cause serious problems in Canadian oil sands production: hindering bitumen extraction, stabilizing water-in-bitumen emulsions, fouling...
-
Fall 2011
The correlation between froth recovery and air recovery was established in a top-feeding mechanical flotation column. It was also found that the particles were stratified in froth layer, with hydrophobic particles (organic phase) concentrated in the upper region, and hydrophilic particles...
-
Flocculation and dewatering of kaolinite suspensions and oil sands mature fine tailings using dual polymers
DownloadSpring 2015
The development of a method to consolidate and dewater Athabasca oil sands mature fine tailings (MFT) is one of the major challenges facing Alberta’s oil sands industry. This thesis presents studies performed on the flocculation and dewatering of kaolinite suspensions (the major clay component...
-
Electrodeposition of iron-cobalt alloys from a dibasic ammonium citrate stabilized plating solution
DownloadFall 2009
Iron-cobalt alloys have been extensively studied as potential hard disk drive write head materials due to their potentially high saturation flux densities (~2.4T), low coercivities and ease of deposition. Iron-cobalt plating solutions have, however, been shown to have stability issues,...