Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Baker, Kathleen E.N.
- 1Brandon, Jordan T
- 1Brown, Daniel M.
- 1Chen, Liang
- 10Department of Chemical and Materials Engineering
- 9Department of Civil and Environmental Engineering
- 5Department of Renewable Resources
- 4Department of Earth and Atmospheric Sciences
- 1Chemical and Materials Engineering
- 1Department of Mechanical Engineering
- 2Ulrich, Ania (Department of Civil and Environmental Engineering)
- 2Zeng, Hongbo (Chemical and Materials Engineering)
- 1Askari-Nasab, Hooman (Civil and Environmental Engineering)
- 1Beier,Nicholas
- 1Choi, Phillip (Chemical and Materials Engineering)
- 1Choi,Phillip (Chemical and Materials Engineering)
-
Fall 2014
The extraction of bitumen from oil sands in Alberta, Canada, leads to the creation of tailings that are contained in lake-sized ponds under zero discharge policy. Stratification of tailings over time leads to the formation of mature fine tailings (MFT), an oil based emulsion containing residual...
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...
-
Fall 2011
One of the major issues in the current oil sands waste management techniques is a lack of a direct linkage between the long-term mine plans and the quantity of the tailings produced downstream. This research is focused on developing a linkage between oil sands long-term mine plans and the final...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Bioremediation of oil sands process affected water sourced naphthenic acid fraction compounds
DownloadFall 2020
Current development of Alberta’s oil sands region requires large volumes of water, leading to an abundance of oil sands process affected water (OSPW). OSPW contains naphthenic acid fraction compounds (NAFCs) which have been found to contribute extensively to OSPW toxicity. Degradation of this...
-
A Study on the Effect of Temperature and Pressure on the Removal of Cyclohexane from Non-Aqueous Extraction Gangue
DownloadSpring 2015
Solvent based extraction has the potential to supplant the current hot water based extraction process as the industry standard method for recovering bitumen from mined oil sand. It has the potential for higher bitumen recovery that is less sensitive to the grade of oil sand ore being processed....
-
Spring 2020
Albertan oil sands ores are becoming more difficult to process efficiently as the clay content of the ore increases and the grade of the ore worsens. A key to improving the extraction of bitumen from low-grade oil sands, thereby increasing the longevity of this critical resource, is reducing the...
-
An Examination of the Effect of Diluent on Microbial Dynamics in Oil Sands Tailings and the Mechanistic Insight on Carbon Dioxide-mediated Turbidity Reduction in Oil Sands Surface Water
DownloadFall 2019
Oil sands fluid fine tailings (FFT) are comprised of sand, silt, clay, residual organics, salt, trace metals and process-affected water (OSPW). In order to accommodate and remediate large amounts of FFT, a full-scale demonstration pit lake, where FFT was capped with a mixture of OSPW and fresh...
-
Near-Wellbore Salinity Effect on Sand Control Plugging by Fines Migration in Steam-Assisted Gravity Drainage Producer Wells
DownloadFall 2023
Sand control screens are necessary for steam-assisted gravity drainage (SAGD) wells drilled into oil sands to prevent sand production. However, the accumulation of mobilized fine particles near the wellbore can result in screen plugging, adversely affecting the well's flow performance. This...
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...