SearchSkip to Search Results
- 1Badiozamani Tari Nazari, Mohammad Mahdi
- 1Beier, Nicholas A
- 1Brown, Lisa D
- 1Entezari Najafabadi, Iman
- 1Ho, Timothy Then-Siong
- 1Mahajan, Shaina
Non-aqueous extraction technologies are currently being investigated as an alternative to the conventional water based process for extracting bitumen from oil sands. The reduced dependence on fresh water and land for creation of tailing ponds makes non-aqueous technologies a greener alternative....
The production of a tailings waste stream is ubiquitous to mining and mineral processing operations, especially in Alberta’s oil sands industry. Due to the presence of colloidal clays such as kaolinite, which do not naturally sediment in suspension, water recycling and land reclamation remain...
Oilsands tailings are a waste product comprising primarily a stable alkaline suspension of clay in water. This waste product of oilsands mining is environmentally hazardous to store and expensive to safely dispose of. This work presents two novel ideas for dealing with the waste. The first is...
The focus of the research presented here was to directly measure actual evaporation rates from a tailings surface using a micrometeorological technique known as the eddy covariance method. Depending on the results, it would be determined whether current drying models need to be calibrated with...
The mining of oil sands ore and extraction of bitumen produces aqueous slurries containing bitumen, coarse sand and fine clays. The performance of key process units is highly dependent on the rheology of “carrier fluid”, which is comprised of the fine solids and water. Although viscosity is...
Tailing ponds in Northern Alberta has covered an area of 170 km2. Directive 074 issued in 2009 set stringent criteria for tailings reclamation. Freeze-thaw dewatering is one of the most promising approaches for dewatering MFT as one cycle of freeze-thaw can release up to 50% pore water. In this...
The study investigated the feasibility of using the soil freezing characteristic curve (SFCC) to estimate the soil water characteristic curve (SWCC) in mine waste tailings as an alternative to traditional SWCC testing. Traditional SWCC tests are challenging and time-consuming to conduct, taking...
Effects of Surface Contamination and Water Chemistry on the Behaviors of Illite, Kaolinite and Montmorillonite in Organic and Aqueous MediaDownload
Clays, due to their specific surface area and electrical charge density, are among the most active minerals in aquifers, oil and gas reservoirs, and tailings ponds. Clays, in tailings, are a significant ongoing environmental concern in the mining and oil sands production industries and clay...
Development of compact fluorescent spectrometers and field deployable optical solids content monitoring devicesDownload
Two techniques were used to develop industrial and environmental sensing devices: fluorescence spectrometry and light scatter. The focus of the thesis is to develop real-time, portable and economical sensors using these techniques for environmental detection and management of tailings slurries. A...
This research aims to assist in the assessment of tailings management technologies through the development of a dynamic simulation model. The developed model (TMSim) incorporates the mine plan, various stages of dewatering including classification, pre- and post-deposition dewatering, and an...