Search
Skip to Search Results- 472Oil Sands Research and Information Network (OSRIN)
- 220Oil Sands Research and Information Network (OSRIN)/AOSERP Reports
- 83Oil Sands Research and Information Network (OSRIN)/Government of Alberta Reports
- 72Oil Sands Research and Information Network (OSRIN)/OSRIN Technical Reports
- 61Oil Sands Research and Information Network (OSRIN)/Syncrude Canada Ltd. Reports
- 35Graduate and Postdoctoral Studies (GPS), Faculty of
- 471Report
- 35Thesis
- 5Article (Draft / Submitted)
- 3Research Material
- 2Conference/Workshop Poster
- 2Conference/Workshop Presentation
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...
-
Turbidity Mitigation in an Oil Sands End Pit Lake through pH Reduction and Fresh Water Addition
DownloadFall 2016
The remediation of oil sands wastes such as fluid fine tailings (FFT) and oil sands process-affected water (OSPW) are of increasing concern in the oil sands industry. End pit lakes are one remediation option currently being researched at commercial scale in Base Mine Lake (BML) operated by...
-
Fall 2011
One of the major issues in the current oil sands waste management techniques is a lack of a direct linkage between the long-term mine plans and the quantity of the tailings produced downstream. This research is focused on developing a linkage between oil sands long-term mine plans and the final...
-
Applications of Remote Hyperspectral Sensing in the Characterization of Alberta's Oil Sands Tailings
DownloadSpring 2016
The bitumen production from oil sands surface-mining operations produces large volumes of mineral wastes called tailings. Characterization of the oil sands tailings is of importance to monitor their state for trafficability and reclamation issues, to assess the tailings operation performance, and...
-
Spring 2010
Molecular dynamics simulation and density functional theory were applied to calculate heats of immersion (ΔHimm) of n-heptane, toluene, pyridine and water on two model sand surfaces and two model clay surfaces. Our results indicated that water showed the highest ΔHimm for the model clay surfaces...
-
Possible thunderstorm modifications caused by the Athabasca oil sands development and the Canadian Shield
DownloadFall 2017
Thunderstorms are common in boreal forest regions and can cause dangerous hazards such as lightning, forest fires, hail, wind, and flooding. Significant research has been conducted to help predict thunderstorms to mitigate or avoid the hazards and damage. The development of thunderstorms...
-
Methane Production and Emission Mitigation in Oil Sands Tailings Concurrent with Hydrocarbon Degradation under Nitrogen Limited Conditions
DownloadFall 2020
Alberta’s oil sands generate large volumes of tailings from bitumen ore processing. These tailings ponds produce biogenic methane, which can be measured across 60-80% of the tailings surface. Based on current surface area data and emissions studies, tailings ponds could account for 8% of Canada’s...
-
Fall 2014
The extraction of bitumen from oil sands in Alberta, Canada, leads to the creation of tailings that are contained in lake-sized ponds under zero discharge policy. Stratification of tailings over time leads to the formation of mature fine tailings (MFT), an oil based emulsion containing residual...
-
Oil Upgrading by Molecular Rearrangement and Cracking: A Study Using Model Compounds and Natural Chabazite
DownloadFall 2015
As demand for fuel increases, new technologies that can convert heavy oil and bitumen into light fuels are needed. Natural zeolites have been proven to catalyze reactions that decrease molecular weight, density, nitrogen, and metals content as well as vacuum residue content when mixed with raw...
-
Influence of Amendments and Soil Depth on Available Nutrients and Microbial Dynamics in Contrasting Topsoil Materials Used for Oil Sands Reclamation
DownloadFall 2015
As of December 2013, the cumulative area disturbed by oil sands mining in NE Alberta was 896 km2 out of an estimated final footprint of 4,800 km2 – all of which will require reclamation. Expensive handling costs and scarce soil resources necessitate judicious management and application of...