Search
Skip to Search Results- 1Abtahi, Shaghayegh
- 1Aghaie, Ermia
- 1Ahmed, E.
- 1Ahmed, Ezz Q
- 1Arango Vasquez,Daniela
- 1Behnamian, Yashar
- 24Graduate Studies and Research, Faculty of
- 24Graduate Studies and Research, Faculty of/Theses and Dissertations
- 1Chemical and Materials Engineering, Department of
- 1Chemical and Materials Engineering, Department of/Research Articles and Materials (Chemical and Materials Engineering)
- 1Mechanical Engineering, Department of
- 1Mechanical Engineering, Department of/Progress in Canadian Mechanical Engineering, Volume 5
- 5Chen, Weixing (Chemical and Materials Engineering)
- 5Luo, Jingli (Chemical and Materials Engineering)
- 2Li, Dongyang (Chemical and Materials Engineering)
- 2Mitlin, David (Chemical and Materials Engineering)
- 2Thundat, Thomas (Chemical and Materials Engineering)
- 1Al-Hussein, Mohamed (Civil and Environmental Engineering)
-
Investigation of Surface Crack Growth Behaviour Under Variable Pressure Fluctuations in Near-Neutral pH Environments
DownloadFall 2017
The goal of this investigation was to study the corrosion fatigue behaviour and mechanisms of surface cracks, semi-elliptical in shape, when exposed to near-neutral pH environments conducive to the environments experienced in the field. To better simulate field conditions, while avoiding the...
-
The Study of the Corrosion Behavior of Gas Nitriding Treated L80 Steel in Simulated Environment for the Slotted Liners of SAGD
DownloadSpring 2016
The oil sand in Alberta province is mainly extracted by Steam Assisted Gravity Drainage (SAGD) technique which employs the slotted liners as the primary sand screening system. However, the slotted liners made of L80 carbon steel suffer from severe corrosion and erosion problems in the downhole...
-
Fall 2019
The most common detrimental processes that lead to reduction in durability in reinforced concrete elements are shrinkage, sulphate attack and chloride attack. Shrinkage is a dimensional instability chiefly caused by a loss of moisture in the hydrating cement paste. Soluble sulphate ions take part...
-
Spring 2015
This thesis presents a thorough examination of the corrosion and fouling behaviour of crude oil at refining conditions on industrially applicable heat transfer surfaces. The depletion of light sweet crude oil reserves means that the processing of ever heavier and more sour crude oils is...
-
Spring 2022
Filiform corrosion (FFC, also known as under-film corrosion) is commonly observed on surfaces of coated aluminum (Al) and aluminum alloys (AA), especially in environments combining marine and industrial atmosphere. The chemical composition of the substrate is believed to play an important role in...
-
Electrochemical Performance of a Wire Arc Additive Manufactured PH 13–8Mo -AISI 420 Martensitic Stainless Steels Dissimilar Metal Combination
Download2022-06-01
Salahi, Salar, Ghaffari, Mahya, Nemani, Alireza Vahedi, Nasiri, Ali
Conference abstract. Part of the Proceedings of the Canadian Society for Mechanical Engineering International Congress 2022.
-
Corrosion Assessment and Mechanisms of Materials in Pre-hydrolysis and Hydrothermal Liquefaction Biorefining Systems
DownloadFall 2022
Advanced biomass conversion technologies, including hot dilute acidic pre-hydrolysis and hydrothermal liquefaction, have been developed for the generation of renewable bioenergy products and biochemicals from existing biomass resources and biowastes. However, the deployment of the technologies is...
-
Corrosivity and Thermal Stability of Biocrude Oil for Co-Processing in FCC Feedlines: An Investigation and Risk Assessment
DownloadSpring 2023
Fast pyrolysis bio-oil is a promising renewable energy source derived from biomass. However, its high corrosivity and poor thermal stability have limited its widespread use as a drop-in fuel. One promising method for transforming low-quality biocrudes into drop-in fuels is co-processing with...
-
Development of Finite Element Modeling and Bayesian Parameter Estimation Strategies for Corroded RC Bridges towards Probabilistic Seismic Performance Assessment
DownloadFall 2022
Reinforced concrete (RC) structures, such as RC bridges, are designed to remain safe and functional for their lifetime, during which the impacts of aging may result in performance degradation. Steel bar corrosion is one of the most common causes of structural performance degradation in RC...
-
Fall 2023
Tribocorrosion, a synergistic impact of wear and corrosion, impacts the lifespan of machine parts in most sectors. Consequently, duplex coating has emerged as the most promising solution to address tribocorrosion. In this work, advanced noble duplex coating systems of TiAlN/WC-NiBSi/steel and...