Search
Skip to Search Results- 1Abtahi, Shaghayegh
- 1Aghaie, Ermia
- 1Ahmed, E.
- 1Ahmed, Ezz Q
- 1Arango Vasquez,Daniela
- 1Behnamian, Yashar
- 24Graduate Studies and Research, Faculty of
- 24Graduate Studies and Research, Faculty of/Theses and Dissertations
- 1Chemical and Materials Engineering, Department of
- 1Chemical and Materials Engineering, Department of/Research Articles and Materials (Chemical and Materials Engineering)
- 1Mechanical Engineering, Department of
- 1Mechanical Engineering, Department of/Progress in Canadian Mechanical Engineering, Volume 5
- 5Chen, Weixing (Chemical and Materials Engineering)
- 5Luo, Jingli (Chemical and Materials Engineering)
- 2Li, Dongyang (Chemical and Materials Engineering)
- 2Mitlin, David (Chemical and Materials Engineering)
- 2Thundat, Thomas (Chemical and Materials Engineering)
- 1Al-Hussein, Mohamed (Civil and Environmental Engineering)
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Fall 2015
The present research has been done with the intent of evaluating the corrosion resistance and cracking susceptibility of some commercial candidate alloys that can be potentially used in Gen-IV supercritical water reactor (SCWR). The mechanism of the crack initiation in austenitic alloys exposed...
-
Fall 2022
The application of dissolvable materials is becoming widely used in hydraulic fracturing, especially in low permeability reservoirs. To date, most of the DAs are based on Al alloys (AAs) or Mg alloys, which offer desirable dissolvability, yet limited mechanical properties. This work aims to...
-
Design and Implementation of Chipless RFID-Based Monitoring Sensor System for Coated Metallic Structures' Integrity
DownloadFall 2020
This thesis work presents structural health monitoring (SHM) techniques for coated-metallic structures based on Chipless Radio Frequency Identification (RFID) technology. The structures of interest for this study include pipelines for crude oil transportation and storage tanks (or terminals). The...
-
Spring 2013
As the Supercritical Water-cooled Reactor (SCWR) shows a promising future, the corrosion behavior of candidate materials has attracted great interest. In this study, experimental investigation was conducted to evaluate the corrosion behavior of the ferritic-martensitic steels designed for the use...
-
Fall 2019
An evaluation of the resistance of two different X70 pipeline steels to hydrogen-induced cracking in severe (pH 2.7 and 1 atm H2S) and intermediate (pH 5.5 and 1 atm H2S) sour service conditions was undertaken. The two steels used in this work, X70-X and X70-B, were selected based on their...
-
Investigation of Highly Corrosion Resistant and Electrically Conductive Coatings on Metal Bipolar Plates Used in Polymer Electrolyte Membrane Fuel Cell
DownloadSpring 2019
There are apparent technical and economic advantages to replace carbon-based bipolar plates using metal bipolar plates (MBP) for applications in polymer electrolyte membrane fuel cell (PEMFC). However, MBP suffers from corrosion in the acidic environment of PEMFC, and the subsequently formed...
-
Spring 2017
Severe localized corrosion was found throughout an aeration tank of a modular wastewater treatment plant. Specifically, pitting, crevice corrosion, galvanic corrosion, and intergranular corrosion (IGC) were observed on the 5000 and 6000 series aluminum alloys used in the tank’s construction. One...
-
Fall 2015
Mechanical, tribological and corrosion properties of metallic materials are of significance to their industrial applications and have been studied for long time. Efforts are continuously made to correlate these properties to more fundamental parameters in order to effectively improve the...
-
Investigation of Corrosion and Crack Morphology Behavior under Disbonded Coatings on Pipelines
DownloadFall 2015
Coating disbondment on pipelines is a common phenomenon that leads to exposure of the pipeline metal to the surrounding soil and ground water solutions. The exposure of pipelines to those corrosive environments is associated with development of corrosion and Stress Corrosion Cracking (SCC) on the...