Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Amani, Mohammad Javad
- 1Baker, Kathleen E.N.
- 1Bhushan, Vivek
- 1Black, Meghan E
- 45Department of Chemical and Materials Engineering
- 16Department of Civil and Environmental Engineering
- 7Department of Mechanical Engineering
- 6Department of Earth and Atmospheric Sciences
- 5Department of Renewable Resources
- 2Department of Chemistry
- 5Xu, Zhenghe (Chemical and Materials Engineering)
- 4De Klerk, Arno (Chemical and Materials Engineering)
- 2Amirfazli, Alidad (Mechanical Engineering)
- 2Kuznicki, Steve (Chemical and Materials Engineering)
- 2Liu, Qi (Chemical and Materials Engineering)
- 2Liu, Qingxia (Chemical and Materials Engineering)
-
Microwave Heating Of Non-Aqueous Oil Sands Extraction Gangue: Study Of Optimal Cyclohexane-Water Mass Ratio And Solvent Recovery Rate
DownloadFall 2023
Non-aqueous bitumen extraction processes (NAE) of mined oil sands ore have been investigated to circumvent the environmental and operating limitations of the current hot water-based technology. However, one primary challenge of NAE is a solvent recovery that meets environmental and economic...
-
Near-Wellbore Salinity Effect on Sand Control Plugging by Fines Migration in Steam-Assisted Gravity Drainage Producer Wells
DownloadFall 2023
Sand control screens are necessary for steam-assisted gravity drainage (SAGD) wells drilled into oil sands to prevent sand production. However, the accumulation of mobilized fine particles near the wellbore can result in screen plugging, adversely affecting the well's flow performance. This...
-
A Long-Term Integrated Assessment of Cost, Water Consumption, and Greenhouse Gas Emissions of a Transition to a Low-Carbon Bitumen and Hydrogen Production
DownloadFall 2023
The growing demand for energy and the need for mitigation of greenhouse gas (GHG) emissions has led to increased interest from government, industry, and academia in the development of new low-carbon technologies for bitumen extraction and hydrogen production. In situ bitumen is a major...
-
Fall 2023
At the heart of heavy oil and bitumen upgrading, thermal conversion technologies are found. One such process is visbreaking where bitumen is thermally converted into lighter materials. However, the conversion by visbreaking is limited by the onset of the formation of solid carbonaceous materials...
-
The Roles of Constituent Minerals and Residual Bitumen in the Filtration of Alberta Oil Sands Tailings
DownloadFall 2022
The dewatering of Alberta oil sands tailings is one of the most challenging problems faced by the oil sands industry. Despite significant efforts in the past several decades, the industry still lacks viable technologies that can quickly dewater and reclaim the oil sands tailings and eliminate...
-
Boxed-in: Comparing Algorithms for Box-flight Mass-Balance Greenhouse Gas Flux Measurements from Mineable and In Situ Oil Sands Developments
DownloadSpring 2022
To combat global warming, Canada has committed to reducing greenhouse gases (GHGs) 40-45% below 2005 emission levels by 2025. Monitoring emissions and deriving accurate inventories are essential to reaching these goals. GHGs can be measured at a small scale, often using ground measurements which...
-
Dynamics of spontaneous initial spreading and spreading of a hydrodynamically driven droplet under the influence of surrounding pressure
DownloadFall 2021
We investigate experimentally the early time dynamics of spontaneous spreading of silicone oils with various viscosities at elevated surrounding pressures. The surrounding medium pressure is increased in a monotone fashion starting from atmospheric pressure to a maximum value of 30 megapascal...
-
Bitumen Extraction, Indigenous Land Conflicts, and Environmental Change in the Athabasca Oil Sands Region, 1963-1993
DownloadSpring 2021
This dissertation examines the first development phase of the Alberta oil sands industry from the 1960s to the early 1990s. It draws on public and private records from archives in Canada and the United States, the results of collaborative research with the Fort McMurray Métis, and oral history...
-
Synergistic Role of Sodium Hydroxide and Sodium Citrate on Bitumen Slime Coating in Process Water
DownloadFall 2021
Sodium hydroxide (NaOH) is generally used as the primary processing aid in the water-based oil sands extraction for the recovery of bitumen. It was found by Syncrude Canada Ltd. that the combined use of sodium hydroxide and sodium citrate could effectively improve the bitumen recovery as compared...