Search

Fall 2012

Khademi, Sima

Stabilization of water droplets in froth treatment process results in poor de-watering efficiency and potentially affects final bitumen quality. The purpose of this research is to study the effect of solid contamination by diluted bitumen on water droplet stabilization in water in oil emulsions....

Spring 2013

Wang, Louxiang

As one of the most critical steps to recover valuable particles from a slurry using flotation, knowledge of the drainage of the thin liquid film between an air bubble and a solid surface is required. The main focus of this thesis is to develop and use an integrated thin film drainage appratus...

Spring 2013

Wang, Shiqing

Two inorganic-organic hybrid polymers, Al(OH)3-polyacrylamide (Al-PAM) and Fe(OH)3-polyacrylamide (Fe-PAM) were synthesized and used in flocculating model tailings (5 wt% kaolin suspensions) and laboratory extraction tailings. For comparison, a commercial anionic flocculant, partially hydrolyzed...

Spring 2013

Ansari, Nesma Nasir

Solvents are ubiquitously used in oil sands extraction industry to enhance the separation of bitumen froth. With developing new technologies such as non-aqueous bitumen extraction, the need to track solvent interactions with oil sands components throughout the extraction process and to identify...

Fall 2014

Kaura, Aditya

Management of oil sands tailings from bitumen extraction operations remains a challenge for mineable oil sands producers. Promoting fine solids settling in tailings ponds is key to treating oil sands tailings. Present study explores two methods of tailings treatment – ATA process and polymer...

Fall 2014

Bobicki, Erin R.

Mineral carbon sequestration (MCS) is a type of carbon storage based on natural rock weathering processes where CO2, dissolved in rainwater, reacts with alkaline minerals to form solid carbonates. Although MCS has advantages over other carbon storage techniques, an economic MCS process has not...

Spring 2014

Klein, Colin G

In bitumen recovery from oil sands, a percentage of the bitumen is lost to tailings. The effect of fugitive bitumen on fines settling and consolidation in tailings ponds remains controversial. In the current study, the settling performance of mature fine tailings (MFT) in response to flocculant...

Fall 2014

Rafie Borujeny, Elham

Interactions of finely dispersed abrasive particles in chemical mechanical planarization (CMP) slurries play a vital role in determining the polishing performance. In this study, coupled influence of hydrodynamic and colloidal interactions on the attachment of nanosized ceria (CeO2) particles to...

Fall 2015

Liang, Yin

In previous studies, nontoxic and biodegradable ethylcellulose (EC) was shown to be capable of breaking water-in-diluted bitumen emulsions. Nevertheless, the demulsification mechanism of EC has not been correlated to its effect on the physical properties of stabilizing interfacial asphaltene...

Spring 2015

Guo, Jian

This research aims at treating mature fine tailings (MFT) with a novel pH-responsive copolymer poly (N,N-dimethylaminoethyl methacrylate-co-acrylamide-co-acrylic acid) p(DMAEMA-co-AM-co-AA). Compared with conventional polyacrylamide (PAM), the conformation and property of this novel copolymer can...