Search
Skip to Search Results- 44Xu, Zhenghe (Chemical and Materials Engineering)
- 10Liu, Qingxia (Chemical and Materials Engineering)
- 9Masliyah, Jacob (Chemical and Materials Engineering)
- 3Choi, Phillip (Chemical and Materials Engineering)
- 2Masliyah, Jacob H. (Chemical and Materials Engineering)
- 1Afacan, Artin (Chemical and Materials Engineering)
- 1Adegoroye, Adebukola
- 1Ansari, Nesma Nasir
- 1Bobicki, Erin R.
- 1Chan, Margo Chi Wing
- 1Chowdhry, Manjeet
- 1Curran, Meghan D
-
Fall 2011
This project was initiated to study the H2S removal process from liquid sulfur and later extended to generic liquid degassing scenarios. Enersul HyspecTM Degassing Process was first field tested so that comparison could be made with new units to be engineered. Two new degassing units were...
-
Fall 2011
The correlation between froth recovery and air recovery was established in a top-feeding mechanical flotation column. It was also found that the particles were stratified in froth layer, with hydrophobic particles (organic phase) concentrated in the upper region, and hydrophilic particles...
-
Fall 2011
A cationic thermal sensitive polymer, polyN-isopropylacrylamide-co-N-[3-(Dimethylamino)propyl]methacrylamide (CP) of different molar ratios, known as CP05 and CP10 was synthesized in-house. By doping aluminum hydroxide (Al(OH)3) colloids into CP during the polymerization process, a novel hybrid...
-
A fundamental study of bubble-particle interactions through zeta-potential distribution analysis
DownloadSpring 2011
Understanding the mechanism of bubble-particle interactions plays a critical role in advancing flotation technology. In this study, submicron size bubbles with an average diameter less than 1 μm and a life time of at least several hours were generated using a novel hydrodynamic cavitation method....
-
Spring 2011
A Surface Forces Apparatus (SFA) was used in this study to investigate the fundamental surface forces in oil sand processing research. Asphaltene coated surfaces were chosen as the research topic due to the critical role of asphaltenes in oil sands processing, from bitumen extraction, froth...
-
A Molecular Dynamics Study of the Dissolution of Asphaltene Model Compounds in Supercritical Fluids
DownloadSpring 2011
The demand for a new solvent to treat oilsands was behind the purpose of this project; molecular dynamics simulation was used in this study. Supercritical water, supercritical carbon dioxide and other selected organic solvents in their supercritical state were studied. Meso-tetraphenyl porphyrin...
-
Fall 2011
Carbon dioxide (CO2) was shown as a promising alternative for oil sands tailings treatment with economical and environmental benefits. This thesis aims to understand the role of CO2 addition in settling and densification of oil sands tailings. In this study, CO2 was pressurized into two...
-
Spring 2011
Bitumen recovery by the water-based extraction process produces waste streams known as tailings. When discharged into the tailing ponds, the coarse solids in the tailings stream settle out quickly, while the fine solids accumulate over years of settling to a solids content of 30-35% by weight....
-
Understanding the Role of Caustic Addition: A Comparison of Sodium Hydroxide and Ammonium Hydroxide
DownloadSpring 2012
To understand the role of caustic addition and its effect on the bitumen extraction process, a novel flow cell and a Denver Cell extraction unit were utilized. This allowed for the comparison of sodium hydroxide and ammonium hydroxides effect on real oil sands ores. Several ores (A1, C-ore,...
-
Fall 2012
Two major kinds of natural surfactants are released during oil sands extraction: carboxylic acids (naphthenic acids) and sulfonic acids. In this study, commercial surfactants were used as standards to establish the suitable analytical methods with optimized experimental and instrumental...