ERA

Download the full-sized PDF of (RADA)4 Self-Assembling Peptide based Hydrogels: Design, Characterization and In-Vitro Biological EvaluationDownload the full-sized PDF

Analytics

Share

Permanent link (DOI): https://doi.org/10.7939/R3DR2PH4V

Download

Export to: EndNote  |  Zotero  |  Mendeley

Communities

This file is in the following communities:

Graduate Studies and Research, Faculty of

Collections

This file is in the following collections:

Theses and Dissertations

(RADA)4 Self-Assembling Peptide based Hydrogels: Design, Characterization and In-Vitro Biological Evaluation Open Access

Descriptions

Other title
Subject/Keyword
(RADA)4
Peptide
Hydrogel
Nanofiber
Self-assembly
Biocompatibility
Biomaterial
Type of item
Thesis
Degree grantor
University of Alberta
Author or creator
Saini, Aditi
Supervisor and department
Unsworth, Larry (Chemical and Materials Engineering)
Examining committee member and department
Unsworth, Larry (Chemical and Materials Engineering)
Zeng, Hongbo (Chemical and Materials Engineering)
Uludag, Hasan (Chemical and Materials Engineering)
Chen, Lingyun (Agricultural, Food & Nutritional Science)
Rinker, Kristina D. (Chemical and Petroleum Engineering, University of Calgary)
Hogeveen, Bryan (Sociology)
Department
Department of Chemical and Materials Engineering
Specialization
Chemical Engineering
Date accepted
2016-10-07T09:09:42Z
Graduation date
2016-06:Fall 2016
Degree
Doctor of Philosophy
Degree level
Doctoral
Abstract
Ionic self-assembling peptides have emerged as promising nano-biomaterials, with direct applications in the fields of bioengineering and applicative medicine. (RADA)4 is a self-assembling 16 residue containing peptide, with alternating hydrophobic and hydrophilic residues. This characteristic amphiphilic nature of the peptide allows it to self-assemble into β-sheets, forming higher order three-dimensional (3D) structures. The resulting 3D hydrogels are non-immunogenic, highly hydrated (containing > 99% water), and can respond to physiological stimuli. The (RADA)4 hydrogels can serve as ECM (extra cellular matrix) scaffolds, assist in drug delivery, and can achieve rapid hemostasis. This dissertation consists of two major parts: 1) fundamental study of the self-assembly of the model ionic complementary peptide (RADA)4, and 2) in-vitro biocompatibility assessment of the (RADA)4 peptides. In the fundamental study, the secondary structure of (RADA)4 was examined with Circular Dichroism (CD), and compared to that of its two variants: (RADA)4K5 and (RADA)4S5. The effect of peptide concentration and temperature on the secondary structure was also studied. It was found that all but (RADA)4K5 peptides formed successful β-sheets, consequently forming nanofibers, whereas (RADA)4K5 resulted in the formation of aggregates rich of primarily random coil sequences. Further, studies were conducted to determine the critical concentration of (RADA)4K5 for successful nanofiber formation. The 3D nanostructure of the peptide was affected by the amino acid sequence as well as by the temperature induced denaturation of the peptide. Quantitative structural analysis of all the samples were carried out using an online DICHROWEB server, by comparing the secondary structure molar ellipticity of the peptides collected with that of seven reference proteins (data confirmed via X-ray crystallography). Single-molecule Florescence Correlation Spectroscopy (FCS) was used to confirm the molecular interaction of the pristine (RADA)4 nanofibers with 25% (RADA)4K5. The effect of hydration on these self-assembling peptides was investigated via Differential Scanning Calorimetry (DSC), over a range of temperatures. The Equilibrium Water Content (EWC) in (RADA)4 was comparable to (RADA)4S5 and (RADA)4K5, even at varying compositions. The content of non-frozen bound water increased upon appending either Lysine or Serine residues to the (RADA)4 peptide. Microscopy techniques such as Atomic Force Microscopy (AFM), and Transmission Electron Microscopy (TEM), were also employed to visually inspect the higher order structures formed by these peptides. The second part of this dissertation focuses on the in-vitro biocompatibility of the (RADA)4 based peptides. The PAC-1, CD62-P, and CD42 markers were used to study platelet activation (via Flow Cytometry) and a time based clotting analysis was conducted to evaluate the hemostatic ability of peptides. Complement C3a ELISA assay was conducted with (RADA)4 based peptides to gain more insight into the biocompatibility. The pristine (RADA)4 nanofibers caused a rapid clot formation, but yielded a low platelet activation and low C3a activation. Whereas, (RADA)4K5 peptide displayed a significantly higher complement activation, when compared to both (RADA)4S5, and the (RADA)4 peptide, likely due to the free NH3 groups and steric hindrance in packing. The overall trend of the platelet activation among the three variants of the peptides remained consistent: (RADA)4K5 activated the platelets to the highest, whereas (RADA)4S5, and (RADA)4 showed comparable platelet activation. However, it should be noted that both the platelet and complement activation by these peptides were lower than the already considered biocompatible biopolymers. Lastly, morphology analysis of the platelets in contact with the hydrogels was conducted by calculating the Morphology Score (MS) using a Kunicki scoring system, and the platelets were visualized using Scanning Electron Microscopy (SEM). An overall Kunicki morphology score of above 385 was achieved for all the peptides, where a score of less than 200 represent poor retention of morphological characteristics associated with platelets that are active. Overall, the (RADA)4 based peptides had a lower, or comparable platelet and complement activation, when compared with the already in-use biomaterials (such as poly(methyl methacrylate), and dextran), making them a desirable material to further investigate. The work in this dissertation, not only provides the fundamental knowledge to design novel biomaterials for direct application in medicine, but also provides the stepping stone for further in-vitro and in-vivo biocompatibility analysis, required for any further medical application.
Language
English
DOI
doi:10.7939/R3DR2PH4V
Rights
This thesis is made available by the University of Alberta Libraries with permission of the copyright owner solely for the purpose of private, scholarly or scientific research. This thesis, or any portion thereof, may not otherwise be copied or reproduced without the written consent of the copyright owner, except to the extent permitted by Canadian copyright law.
Citation for previous publication
A. Saini, K. Koss, and L. D. Unsworth. “Effect of Peptide Concentration on Water Structure, Morphology, and Thermal Stability of Self-Assembling (RADA)4 Peptide Matrices”, Journal of Biomaterials and Tissue Engineering, 2014, 4 (11), 895-905.A. Saini, K. Serrano, K. Koss, and L. D. Unsworth “Evaluation of the Hemocompatibility and Rapid Hemostasis of (RADA)4 Peptide-Based Hydrogels”, Acta Biomaterilia, 2016, 31, 71-79

File Details

Date Uploaded
Date Modified
2016-10-07T16:21:40.623+00:00
Audit Status
Audits have not yet been run on this file.
Characterization
File format: pdf (PDF/A)
Mime type: application/pdf
File size: 9442694
Last modified: 2016:11:16 15:46:23-07:00
Filename: Saini_Aditi_201610_PhD.pdf
Original checksum: 79245d1bf56ee20d4b0e6d1841a5542f
Activity of users you follow
User Activity Date