ERA

Download the full-sized PDF of Scale-up of Solvent Injection Processes in Post-CHOPS ApplicationsDownload the full-sized PDF

Analytics

Share

Permanent link (DOI): https://doi.org/10.7939/R3542JP23

Download

Export to: EndNote  |  Zotero  |  Mendeley

Communities

This file is in the following communities:

Graduate Studies and Research, Faculty of

Collections

This file is in the following collections:

Theses and Dissertations

Scale-up of Solvent Injection Processes in Post-CHOPS Applications Open Access

Descriptions

Other title
Subject/Keyword
Solvent Injection Processes
Wormhole Networks
Post-CHOPS
Type of item
Thesis
Degree grantor
University of Alberta
Author or creator
Martinez Gamboa, Juan Jose
Supervisor and department
Leung, Juliana (Petroleum Engineering)
Examining committee member and department
Li, Huazhou (Andy) (Petroleum Engineering)
Jin, Zhehui (Charlie) (Petroleum Engineering)
Department
Department of Civil and Environmental Engineering
Specialization
Petroleum Engineering
Date accepted
2017-09-26T13:31:20Z
Graduation date
2017-11:Fall 2017
Degree
Master of Science
Degree level
Master's
Abstract
Cold Heavy Oil Production with Sand (CHOPS) is widely used as a primary non-thermal production technique in thin heavy oil reservoirs in Western Canada and some other regions in South America. It has been reported that more than 85% of the original oil in place remains trapped in-situ, requiring additional follow-up (i.e., post-CHOPS) recovery strategies to be implemented. Solvent-aided processes, such as cyclic solvent injection (CSI), are commonly adopted due to the particular thin pay zone, which renders the application of thermal approaches uneconomical. It is widely accepted that configuration of wormhole networks (i.e., high-permeability channels caused by sand production) and foamy oil flow are key characteristics pertinent to these processes, and they play an important role in the overall success. Field-scale flow simulations are often performed to approximate the reservoir response and to optimize operating strategies. However, grid block sizes in field-scale models are generally much larger than the wormhole scale, and numerical analysis is often performed by arbitrary adjustment of dispersivity. This thesis proposes a practical workflow to scale up these mechanisms for field-scale simulations in wormhole networks that span over multiple scales. First, a set of detailed high-resolution (fine-scale) simulation models, where both matrix and high-permeability wormholes (modeled as fractal networks) are represented explicitly in the computational domain, is constructed to model how the solvent propagates away from the wormholes and into the bypassed matrix. Next, a dual-permeability approach is adopted to facilitate the scale-up analysis. Solvent transport and additional mixing in wormhole networks can be captured by parameters such as shape factor and effective dispersivity in an equivalent coarse-scale dual-permeability system. Bivariate distributions of effective longitudinal/transverse dispersivities and wormhole intensity are constructed and calibrated by minimizing the difference in recovery response (i.e., profiles of gas/oil production) between the detailed model and an equivalent dual-permeability continuum model. Finally, field-scale simulations are constructed using average petrophysical properties and initial conditions (fluid saturations, pressure distribution, and wormhole development) commonly encountered at the end of CHOPS. Multiple field injection scenarios (i.e., of different number of cycles and durations of the soaking period) are simulated and analyzed. As expected, extended soaking period is more beneficial in terms of ultimate oil recovery (slower decline in oil rate), but it also reduces the early production rate. These observations can be attributed to the fact that a longer soaking period may prolong the production phase by increasing the effective drainage area contacted by the solvent; however, the amount of solvent in the near well region is also diluted. Interestingly, when an economic limit (i.e., minimum oil producing rate) is imposed, the optimal soaking time is not necessarily the longest one. It depends on the trade-off between extracting additional oil recovery at late times versus producing at a higher rate at early times. The analysis also reveals that during the implementation of multiple consecutive cycles, the two initial cycles contribute the most to the final oil recovery. Therefore, injecting larger volumes of solvent and extending the soaking times are recommended strategies during the first and/or second cycles. In addition, when the amount of solvent available is limited, the results support in the strategy of injecting all the solvent in one single consolidated cycle, with an extended soaking period, rather than performing shorter consecutive cycles.
Language
English
DOI
doi:10.7939/R3542JP23
Rights
This thesis is made available by the University of Alberta Libraries with permission of the copyright owner solely for the purpose of private, scholarly or scientific research. This thesis, or any portion thereof, may not otherwise be copied or reproduced without the written consent of the copyright owner, except to the extent permitted by Canadian copyright law.
Citation for previous publication

File Details

Date Uploaded
Date Modified
2017-09-26T19:31:21.541+00:00
Audit Status
Audits have not yet been run on this file.
Characterization
File format: pdf (PDF/A)
Mime type: application/pdf
File size: 3776147
Last modified: 2017:11:08 16:37:11-07:00
Filename: MartinezGamboa_JuanJose_201709_MSc.pdf
Original checksum: 42758940094c02e157c73d2c4e9d29d0
Activity of users you follow
User Activity Date